User-Friendly Brand Software Cornerstone

LECO's exclusive brand software enables the user to have complete access to analysis Cornerstone control, method settings, diagnostics, reporting, and more in a highly organized and immersive environment. Designed through a collaboration of customer feedback and innovative engineering,Cornerstone allows the user to conduct all of their day-to-day operations within a single Analysis screen designed for speed and ease-of-use. Our innovative grouping of sample data into sets and replicates simplifies the data output and automatically calculates relevant statistics, alleviating the need for additional data processing.

**的動態流量補償（DFC）保證熱導池氣體流量、壓力恒定。北京美國LECO氧氮氫分析儀價格

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

美國LECO力可氧氮氫分析儀ONH836（氧氮氫聯測儀）系列硬件部分

特點和優勢

1、爐頭區域LED照明系統

2、爐頭快速拆裝的粉塵過濾裝置

3、裝有自動旁路閥的可快速拆裝氧水捕集裝置

4、**的動態流量補償（DFC）保證熱導池氣體流量、壓力恒定

5、改進的紅外檢測池技術

     新紅外池的恒溫絕熱技術消除了外界環境溫度的干擾

   長壽命的紅外發射光源和無漂移的電路設計保證紅外檢測池的長期穩定

   氧高低雙量程采用3個碳紅外檢測器，同時檢測一氧化碳和二氧化碳，保證準確定量

  6、高效脈沖爐冷卻系統

   強力內循環水冷裝置

   雙直流風扇保證持續冷卻，不受電壓波動的影響

   新電極爐頭設計，提高脈沖爐熱交換效率

  7、全自動分析系統（可選）

   自動清掃裝置

   20位或100位全自動分析系統

   高速全自動真空除塵裝置直接將粉塵排至儀器外部捕集器中，消除環境污染

Summary

The determination of the amount of oxygen, nitrogen, and hydrogen in iron, steel, nickel-, and cobalt-base alloys represents some of the most important quality metrics for these materials. Oxygen is used to create steel from pig iron by removing excess carbon. Oxygen content must be controlled to limit the amount of carbon monoxide that can be formed during solidification which may cause excessive porosity. Nitrogen is considered both an impurity as well as an important alloying agent. Itcan be present as a nitride or interstitially in its gaseous form. Increased nitrogen content is known to increase yield and tensile strength, thus decreasing ductility and formability. Excessive levels may evolve during solidification thus increasing porosity. High hydrogen content is the primary cause of embrittlement, blistering and flaking due to its high

mobility through the lattice and provides no potential alloying benefits. The ONH836 utilizes a high-power

electrode furnace to quickly and efficiently release the target gases from within the sample, which allows

for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

Cornerstone氧氮氫分析軟件同時支持***的數據文檔格式和可變的報告格式。

氧氮氫分析儀的原理：分析樣品在惰性氣流存在下于石墨坩堝中加熱熔融，其中脈沖爐溫度可自由設定，并通過一個非接觸式的光學溫度傳感器進行實時監控，用于實現樣品的完全分解，反應所生成的CO H2和N2被帶入到具有高穩定性和靈敏度的檢測系統進行檢測。對于CO的檢測采用的是非色散性紅外檢測器，對于N2和H2的檢測則采用熱導檢測器。

氧氮氫分析儀的特點：快速準確分析，自動化操作；精密氣體校準；CO紅外檢測器，高分辨率和重現性的N、H熱導池檢測器；同一臺儀器實現熔融提取和熱提取；熱提取分析時間可調；可自由選擇溫度*高達2500 °C；光學溫度計溫度測定和控制；所有檢測器自動調零/自動水平控制（ALC）；數據評估的自動優化選擇范圍；爐自動清潔和坩堝自動進樣（可選）；外設電腦進行操作和控制；樣品信息保存； 所有樣品數據可追蹤查詢；通過FTP或本地局域網進行數據傳輸； ON，H分析輕松切換。

Cornerstone氫氧氮分析軟件同時支持***的書記文檔格式和可變的報告格式。浙江美國分析儀哪家好

20位試樣自動進樣系統。北京美國LECO氧氮氫分析儀價格

Procedure - Solid Samples

Instrument calibration/drift correction.

Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.